FEATURE AND APPLICATION
- Consolidate structure, compact, durable and beautiful
- Crust and impeller is made of high press aluminum alloy material, which makes is low weight and smooth running.
- The motor appearance is like pineapple, optimized design, excellent winding design, and it is rotary winding, makes is low temperature rise, low noise, high power factor and good over load ( the ability of over voltage, low 10% voltage)Â Â Â and so on
- It is used in environment like diesel oil gasification stove, industrial boiler, smelting, plastic production machinery, kitchen fitting equipment and other trades equipment where blasting is needed
- Before using, please check carefully all parts supplied for damage caused during the transport.
- It must be used in the voltage, frequency specified on the nameplate.
- Do not install this blower in place where the altitude is higher than 1,000 m and temperature is over 40Â°C.
- It isn’t suitable to use the blower in the too moist or corrosive surrounding.
- When socket is used in power supply, the socket should meet the IEC 335-1 standard ;when power supply is from direct charging, a polarity switch should be installed with contact gap not less than 3 mm on the charging line.
- The Kelly cord is grounding cord, please he sure appropriately ground the blower.
- After electrify, check the impeller swerve. the right swerve is: when it is confronting the over, the blade is rotating easily.
- To avoid causing an accident, don’t touch impeller with your hand or a hard matter before the blower is stopped.
- When the blower accrues such as exceptional noise, smoking, stopping removing please cut off the power. The blower must be returned to our factory or be replaced by special repair service authorized by us.
- If the power lead is damaged, don’t replace the power lead yourself. To ensure the safety, the power lead must be replaced by repair service authorized by a similarly qualified person or sent to us if the lead is absolutely to be replaced
- Expecting in the maintaining range approved by the user manual, do not apart or exchange the blower.
- When using the blower, please do not keep out the cover’s wind entrance.
- Please attend to our remark: “Indoor use only” .
- The blower must be cleaned periodically to keep clean and attractive.
- When clean the blower first please cut off the power and stop the impeller.
- Wash the dirt a away with a soft cloth wetted by soap water or alcohol and with a dry cloth. Don’t use gasoline or any liquid etching the plastics and wipe painting.
- When cleaning the blower, please pay attention to the below matters:
- Try not to apart other parts to clean expect the motor cover and cover.
- Don’t wet the motor and inner electric box during cleaning.
|MODEL||VOLTAGE V||FREQUENTLY Hz||POWER W||SPEED RPM||AIR VOLUME mÂ³/h||AIR PRESSURE Pa||NOISE dB|
1. motor cover 2. motor blade 3. motor 4. crust 5. centrifugal impeller 6.cover
- Under normal operation, any breakdown caused by quality can be exchanged or fixed within one year (based on sale date).
- Our products has a permanently maintenance. Material and repairing will be charged afterÂ “Guarantee period”
- In the following cases, guarantee is not applicable:
- Breakdown not caused by disassembly, reconstruction, repair of our company,
- Natural disaster fire and other wrong operation.
- Valid without stamp of the seller and the indicate year