wallandstandfan1.jpg
wallandstandfa2.jpg

FEATURE AND APPLICATION

  1. Optimized design, reasonable construction and graceful appearance.
  2. Material of high quality such as aluminum alloy and advanced die casting technology are used so that the complete product has light weight, strong wind and low noise.
  3. This fan can be up and downward adjusted and its rotation speed is also controllable and an overload protector is provided. The fan is easily, safely and reliably operated. It is ideal for cool-down, ventilation, heatstroke prevention to improve the environment in the stock house, workshop, mining area and other places.

Wiring Drawing

powerful4

Technical Parameter

Power Full Electrical Fan With 3 Speed

Type Stage l Stage 2 Stage 3
RPM Air volume m³/min noise dB Power W RPM Air volume m³/min noise dB Power W RPM Air volume m³/min noise dB Power W
DF500 – T 1100 100 48 97 1250 122 50 106 1400 136 55 130
DF500 – TW
DF600 – T 1100 132 52 120 1250 158 56 130 1400 205 62 170
DF600 – TW
DF650 – T 1100 158 55 142 1250 182 60 160 1400 231 68 187
DF650 – TW
DF750 – T 1100 225 58 175 1250 283 70 195 1400 317 75 240

Power Full Electric Fan With Single Speed

Type R.P.M. Air volume m³/min noise dB Power W
SF500 – 4 1400 136 55 130
SF500 – 4W
SF600 – 4 1400 205 62 170
SF600 – 4W
SF650 – 4 1400 231 68 187
S650 – 4W
SF750 – 4 1400 317 75 240
SF750 – 4W

Item A H C D E F G H K
500 Stand Fan 560 500 360 300 750 550
600 Stand Fan 660 600 360 300 750 550
650 Stand Fan 710 650 360 300 980 600
750 Stand Fan 810 750 360 300 980 600
500 Wall Fan 560 500 360 250 125 13
600 Wall Fan 660 600 360 250 125 13
650 WalI Fan 710 650 360 250 125 13
750 Wall Fan 810 750 360 250 125 13

powerful1

Assembly Scheme

powerful2

OPERATING INSTRUCTION

  1. Please mount the fan according to the mounting scheme. Before mounting, Please check carefully all parts supplied for damage caused during the transport.
  2. The fan must use the voltage specified on the name plate. It isn’t suitable to use the fan in the too moist or corrosive surrounding.
  3. The fan has 3 speed stages which can be rotated the speed control switch (15) on the fan. The numbers 0, 1, 2 and 3 on the indicator are respectively off, slow, medium and fast stages.
  4. Adjusting of height of air flow of the stand fan:
    1. Lift: Hold firmly the lift pipe (5) or the upper joint (13),loosen the fix screw (12), set the fan to the required height, tighten the screw (12) and move rubber washer (6) to the lowest end.
    2. Lower: Hold firmly the lift pipe (5) or the upper joint(13),loosen the fix screw (12), exert a force to slowly lower the fan to the needed position and tighten the screw (12).
  5. Adjustment of panning angle. Loosen the adjusting screw  (14) move it to the needed position (the more outward the more bigger panning angle) and tighten the screw (14).
  6. Please attend to our remark: “INDOOR USE ONLY “ Û©-ta 40°C.
  7. If the supply cord is damaged, the manufacturer must replace it or its service agent or a similarly qualified person in order to avoid a hazard.

powerful3

Stand Fan

1. Motor 2. Guard 3. Blade 4. Holding screw

5. Lift pipe 6. Rubber washer 7. Lower joint

8. Upright (Stand) pipe 9. Decorative cover 10. Pedestal

11. Screw 12. Fix screw 13. upper joint

14. Adjusting screw 15. Speed control switch